AMH 社区首页
AMH社区 - 开放自由有价值的社区
[求助帖] 求助:AMH安装完后,FTP上传老是超时 |
|
---|---|
kkynietg |
kkynietg 发表于 2014-05-06 18:04:51
安装AMH全部正常,各组件也运行正常,开了主机FTP后,客户端用FlashFXP上传,传几个文件后就连接超时,不知道哪里出了问题,该怎么设置?
FlashFXP部分状态如下: [右] 226-File successfully transferred [右] 226 0.003 seconds (measured here), 3.91 Mbytes per second [右] MFMT 20130628025846 image.inc [右] 213 UTIME OK 已传输: image.inc 13 KB 于 0.01 秒 (13.1 KB/秒) [右] MLST install.core.inc [右] 550 Can't check for file existence [右] PASV [右] 227 Entering Passive Mode (192,168,0,15,39,116) [右] 正在打开数据连接 IP: 192.168.0.15 端口: 10100 [右] 数据 Socket 错误: 连接已超时 已传输: install.core.inc 0 字节 于 20 秒 (0.0 KB/秒) [右] 传输失败! [右] MLST install.core.inc [右] 错误: 10053: 软件引起连接放弃 [右] 连接丢失: 192.168.0.15 已传输 43 文件 (1.26 MB) 于 41 秒 (31.4 KB/秒) [右] 正在尝试重新连接.
点赞,加油! (0分)
2014-05-06 18:04:51 1
|
Captain |
你可以把ftp软件的被动模式关闭试试
回复
2014-05-07 02:53:30 2
|
kkynietg |
回复
2014-05-07 11:05:04 3
|
xiaoniba |
我也是同样问题
回复
2014-05-07 11:57:50 4
|
amysql |
主动模式连接日志呢?
回复
2014-05-07 15:38:37 5
AMH面板 - 好用高效低占用、安全可靠极稳定 |
kkynietg |
已传输: menu-collapsed-rtl.png 107 字节 于 0.00 秒 (0.1 KB/秒) [右] MLST menu-expanded.png [右] 550 Can't check for file existence [右] PASV [右] 227 Entering Passive Mode (192,168,0,15,39,116) [右] 正在打开数据连接 IP: 192.168.0.15 端口: 10100 [右] STOR menu-expanded.png [右] 150 Accepted data connection [右] 226-File successfully transferred [右] 226 0.003 seconds (measured here), 33.69 Kbytes per second [右] MFMT 20130628025846 menu-expanded.png [右] 213 UTIME OK 已传输: menu-expanded.png 106 字节 于 0.00 秒 (0.1 KB/秒) [右] MLST menu-leaf.png [右] 550 Can't check for file existence [右] PASV [右] 227 Entering Passive Mode (192,168,0,15,39,119) [右] 正在打开数据连接 IP: 192.168.0.15 端口: 10103 [右] STOR menu-leaf.png [右] 150 Accepted data connection [右] 226-File successfully transferred [右] 226 0.003 seconds (measured here), 44.20 Kbytes per second [右] MFMT 20130628025846 menu-leaf.png [右] 213 UTIME OK 已传输: menu-leaf.png 126 字节 于 0.01 秒 (0.1 KB/秒) [右] MLST message-16-error.png [右] 550 Can't check for file existence [右] PASV [右] 227 Entering Passive Mode (192,168,0,15,39,124) [右] 正在打开数据连接 IP: 192.168.0.15 端口: 10108 [右] 数据 Socket 错误: 连接已超时 已传输: message-16-error.png 0 字节 于 20 秒 (0.0 KB/秒) [右] 传输失败! [右] MLST message-16-error.png [右] 错误: 10053: 软件引起连接放弃 [右] 连接丢失: 192.168.0.15 已传输 158 文件 (2.47 MB) 于 45 秒 (55.4 KB/秒) [右] 正在尝试重新连接. [右] 正在连接到 192.168.0.15 -> IP=192.168.0.15 PORT=21 (次尝试 # 1) [右] 连接失败 (连接已超时) [右] 正在延迟 120 秒,在此之后将尝试第 2 次重新连接 防火墙开了10100-10110端口
回复
2014-05-07 16:09:19 6
|
Captain |
引用: Passive Mode日志里这些表示你目前还是被动模式
回复
2014-05-07 22:21:03 7
|
kkynietg |
站点设置里已经制定为主动模式了,连接失败后自带转为被动模式连接了。 [右] 正在连接到 192.168.0.15 -> IP=192.168.0.15 PORT=21 [右] 已连接到 192.168.0.15 [右] 220---------- Welcome to Pure-FTPd [privsep] ---------- [右] 220-You are user number 1 of 5 allowed. [右] 220-Local time is now 18:29. Server port: 21. [右] 220-This is a private system - No anonymous login [右] 220-IPv6 connections are also welcome on this server. [右] 220 You will be disconnected after 15 minutes of inactivity. [右] USER tvonline [右] 331 User tvonline OK. Password required [右] PASS (hidden) [右] 230 OK. Current directory is / [右] SYST [右] 215 UNIX Type: L8 [右] FEAT [右] 211-Extensions supported: [右] EPRT [右] IDLE [右] MDTM [右] SIZE [右] MFMT [右] REST STREAM [右] MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; [右] MLSD [右] TVFS [右] ESTA [右] PASV [右] EPSV [右] SPSV [右] ESTP [右] 211 End. [右] PWD [右] 257 "/" is your current location [右] 侦听于端口: 56211,正在等候连接。 [右] PORT 192,168,0,4,219,147 [右] 200 PORT command successful [右] MLSD [右] 连接丢失: 192.168.0.15 [右] 列表 错误 [右] 数据 Socket 错误: 正在接受取消请求 [右] 正在连接到 192.168.0.15 -> IP=192.168.0.15 PORT=21 [右] 已连接到 192.168.0.15 [右] 220---------- Welcome to Pure-FTPd [privsep] ---------- [右] 220-You are user number 2 of 5 allowed. [右] 220-Local time is now 18:30. Server port: 21. [右] 220-This is a private system - No anonymous login [右] 220-IPv6 connections are also welcome on this server. [右] 220 You will be disconnected after 15 minutes of inactivity. [右] USER tvonline [右] 331 User tvonline OK. Password required [右] PASS (hidden) [右] 230 OK. Current directory is / [右] SYST [右] 215 UNIX Type: L8 [右] FEAT [右] 211-Extensions supported: [右] EPRT [右] IDLE [右] MDTM [右] SIZE [右] MFMT [右] REST STREAM [右] MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; [右] MLSD [右] TVFS [右] ESTA [右] PASV [右] EPSV [右] SPSV [右] ESTP [右] 211 End. [右] PWD [右] 257 "/" is your current location [右] CWD / [右] 250 OK. Current directory is / [右] PWD [右] 257 "/" is your current location [右] 侦听于端口: 56221,正在等候连接。 [右] PORT 192,168,0,4,219,157 [右] 200 PORT command successful [右] MLSD [右] 连接丢失: 192.168.0.15 [右] 列表 错误 [右] 数据 Socket 错误: 正在接受取消请求 [右] 正在连接到 192.168.0.15 -> IP=192.168.0.15 PORT=21 [右] 已连接到 192.168.0.15 [右] 220---------- Welcome to Pure-FTPd [privsep] ---------- [右] 220-You are user number 2 of 5 allowed. [右] 220-Local time is now 18:31. Server port: 21. [右] 220-This is a private system - No anonymous login [右] 220-IPv6 connections are also welcome on this server. [右] 220 You will be disconnected after 15 minutes of inactivity. [右] USER tvonline [右] 331 User tvonline OK. Password required [右] PASS (hidden) [右] 230 OK. Current directory is / [右] SYST [右] 215 UNIX Type: L8 [右] FEAT [右] 211-Extensions supported: [右] EPRT [右] IDLE [右] MDTM [右] SIZE [右] MFMT [右] REST STREAM [右] MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; [右] MLSD [右] TVFS [右] ESTA [右] PASV [右] EPSV [右] SPSV [右] ESTP [右] 211 End. [右] PWD [右] 257 "/" is your current location [右] CWD / [右] 250 OK. Current directory is / [右] PWD [右] 257 "/" is your current location [右] 以 PORT 模式连接失败,正在尝试使用 PASV 模式。 [右] PASV [右] 227 Entering Passive Mode (192,168,0,15,39,126) [右] 正在打开数据连接 IP: 192.168.0.15 端口: 10110 [右] MLSD [右] 150 Accepted data connection [右] 226-Options: -a -l [右] 226 29 matches total [右] 列表完成: 3 KB 于 0.06 秒 (3.1 KB/秒) [右] 以 PASV 模式连接成功,请更新站点配置文件中的数据连接。
回复
2014-05-08 10:33:44 8
|
Captain |
内网和本机有开什么防火墙没有
回复
2014-05-09 03:34:56 9
|
kkynietg |
内网和本机都没有防火墙,服务器CentOS6.5有防火墙,关了问题依旧 iptables: Setting chains to policy ACCEPT: filter [ OK ] iptables: Flushing firewall rules: [ OK ] iptables: Unloading modules: [ OK ]
回复
2014-05-12 18:08:45 10
|