产品服务AMH 免费服务器主机面板SSL证书 免费SSL证书申请 担保单 免费安全、零费率交易平台编程助手免费智能写代码、翻译AMYSQL 免费MySQL管理工具

AMH 社区首页

 AMH社区 - 开放自由有价值的社区

[求助帖] 我两台香港,两台大陆,全部nginx-generic-1.6 安装升级失败

xiedandan
铁牌会员
2.00 价值分

xiedandan 发表于 2017-03-18 11:37:41
这升级一定要装 还是可以不安装?

不是新搭建环境,以前环境就搭建好了,上次提示可升级,然后一直升级不上
今天我来到第4台服务器 想试下升级 可是还是不行

怎么发帖不能发图片的~~~

点安装升级时 提示 确认安装升级软件 nginx-generic-1.6 吗?

然后点确定

然后下面是 错误说明 求大神看看~~~

----------------------------------------------------------
nginx-generic-1.6 安装升级失败。
----------------------------------------------------------

checking for long long size ... 8 bytes
checking for void * size ... 8 bytes
checking for uint64_t ... found
checking for sig_atomic_t ... found
checking for sig_atomic_t size ... 4 bytes
checking for socklen_t ... found
checking for in_addr_t ... found
checking for in_port_t ... found
checking for rlim_t ... found
checking for uintptr_t ... uintptr_t found
checking for system byte ordering ... little endian
checking for size_t size ... 8 bytes
checking for off_t size ... 8 bytes
checking for time_t size ... 8 bytes
checking for AF_INET6 ... found
checking for setproctitle() ... not found
checking for pread() ... found
checking for pwrite() ... found
checking for sys_nerr ... found
checking for localtime_r() ... found
checking for posix_memalign() ... found
checking for memalign() ... found
checking for mmap(MAP_ANON|MAP_SHARED) ... found
checking for mmap("/dev/zero", MAP_SHARED) ... found
checking for System V shared memory ... found
checking for POSIX semaphores ... not found
checking for POSIX semaphores in libpthread ... found
checking for struct msghdr.msg_control ... found
checking for ioctl(FIONBIO) ... found
checking for struct tm.tm_gmtoff ... found
checking for struct dirent.d_namlen ... not found
checking for struct dirent.d_type ... found
checking for sysconf(_SC_NPROCESSORS_ONLN) ... found
checking for openat(), fstatat() ... found
checking for getaddrinfo() ... found
configuring additional modules
adding module in ../module/3rd_part_module/nginx-upstream-jvm-route-master
./configure: error: no ../module/3rd_part_module/nginx-upstream-jvm-route-master/config was found
make: *** No rule to make target `build', needed by `default'. Stop.
make: *** No rule to make target `install'. Stop.
2017-03-18 11:37:41 1

lovem
银牌会员
2685.50 价值分

没编译成功呢???
  支持 (0分)  反对 (0分)
回复  2017-03-18 13:28:36 2

寒喵
银牌会员
1282.38 价值分

1.尝试更换 nginx版本 看其他版本是否可以安装
2.更新oepnssl 因为有一定概率官方使用rpm编译时用新的openssl编译导致旧版oepnssl 服务器无法安装模块
如是第二个,则要么自己升级openssl。要么让官方出自带判断openssl版本随同升级后安装nginx
  支持 (0分)  反对 (0分)
回复  2017-03-18 14:43:19 3

shiguo
铝牌会员
410.08 价值分

./configure: error: no ../module/3rd_part_module/nginx-upstream-jvm-route-master/config was found
意思是:nginx-upstream-jvm-route-master下面的config文件找不到
可能是nginx_upstream_jvm_route版本和nginx不兼容造成的,可以通过
svn
checkout http://nginx-upstream-jvm-route.googlecode.com/svn/trunk/
nginx-upstream-jvm-route-read-only
检测下载最新合适的nginx_upstream_jvm_route,然后重新升级试下。
  支持 (4.88分)  反对 (0分)
回复  2017-03-18 23:09:14 4

yanghang
银牌会员
1563.14 价值分

这种应该是增加模块的时候刚开始就没通过,后面直接报错了,可能是缺少什么组件或者不兼容引起的,碰到这种编译错误,最好直接工单来的方便
  支持 (0分)  反对 (0分)
回复  2017-03-19 00:21:49 5
 1  (总1页)
AMH社区列表
用户服务中心